1. Controlled and interlocked with HUMAN MACHINE INTERFACE, any flaw or abnormality detected will activate the Emergency Stop and the alarm to indicate the location of the flaw or failure. This will simplify the process for maintenance and keeping the machine to operate smoothly.
2. This machine have control system, which can cutting the PF-Film based on cloth size to reduce the wash of PF-film.
3. The machine also have special function that can make to PE-Film cutting end more beautiful and more unbreakable.
4. Main Control Interface (Panel) of this unit offer multiple function controls and the corresponding display respectively as well, including Daily Productivity Displays, Result of Detection from Sensor in each Section, Adjustment of Time of each Detection System in various sections, Start Time Reservation, PLC Local Detection Adjustment, Simple Maintenance Function, and Circuit Diagram of the wiring of the machine.
5. The unit allows the cloth to be separated precisely according to the kind and batch size, and also allows itself to interface with various peripheral equipment so as to ensure the cloth reach the preset location rapidly and punctually.
6. General Equipment Model:JH-2800(L:4060mmXW:2370mmXH:1850mm);JH-3300(L:4560mmXW:2370mmXH:1850mm).We also can provide other model, please feel free to contract us.

1.This equipment can storage the unpacking fabric which is ready to packing also can storage the fabric which has been packed.

Belt will not hurt the fabric and easy to clear and also can cover.

And the belt storage conveyor also can cover if customer fabric’s packing range is huge.  

This equipment can storage the unpacking cloth which is ready to packing also can storage the fabric which has been packed before going into storage.

The main function is to avoid the situation of mistake and disorder in the operation area.

This conveyor not only can convey the fabric also can weigh the fabric, when user connect the computer this conveyor can pass the information into user computer.

The main function of this equipment is can change fabric’s transport way that is horizontal to vertical and also can let fabric which is in the lower place become higher place.

This equipment is use high temperature to make PE-Film more suitable after the fabric has been packed.

This equipment can add PP belt which can make operator moving more convenience also can avoid operator’s nail break the PE-film.

This equipment can move the fabric from low to high or high to low which can reduce the damage of the fabric broken when the fabric is moving.  

This equipment can storage the fabric before operator move into warehouse when the fabric has been packed.

1.This equipment must combine with scanner to get the fabric information from user’s ERP system.

2.This equipment can print the label and paste the label on the fabric before the fabric go into the automatic PE-film packing machine.

3.This label is put inside the PE-Film when the fabric has been packed.

4.The purpose of the label put inside the PE-film is to avoid the label is drop out when the fabric has been moving.

This equipment must combine with scanner to get the fabric information from user’s ERP system.

This equipment can print the label and put the label on the fabric’s one side (right- hand or left-hand side) after the fabric has been packing.

The label will paste on the PE-film, will not paste on the fabric direct.

1.Automatic labeling machine (UP):

The label will paste on the fabric direct before the fabric go into the automatic PE-film packing machine.

More detail please find the automatic labeling machine (up) which is on the other page.

2.Automatic labeling machine (SIDE):

The label will paste on the PE-film, which will on the right-hand side or left-hand side.

More detail please find the automatic labeling machine (SIDE) which is on the other page.

PS: Automatic labeling machine must combine the scanner and user’s ERP system

Customer can through this system to contact our engineer to diagnose the system error